Brown fused alumina MSDS

Haixu’s Brown Fused Alumina exactly according to FEPA, China GB, Japan JIS, American ANSI or International ISO standard on Brown Fused Alumina Macro Grits and Micro Grits so that our materials are with fine particle distribution grits. And we check our sieves against standard from time to time.

1. Brown Fused Alumina:
   Other Name: Brown Fused Aluminum Oxide, Brown Fused Corundum
   CAS: 1344-28-1
   EINECS: 215-691-6 Aluminium Oxide Al2O3
   Description: Abrasive and refractory synthetic aggregate.
   Supplied by: J.L International Group Limited
2. Typical Composition:
   Al203 95.0% Min
   Ti02 1.8-2.5%
   Fe203 0.18%
   Si02 1.7%
3. Hazards Identification:
   None specified.
4. First Aid Measures:
   EYE CONTACT: Sharp particles can irritate. Flush with clean
   water and seek medical advice if the offense continues.
   Use suitable eye protection as required.
   SKIN CONTACT: No harmful effects wash with soap and water.
   INHALATION: No toxic effects. They are classified as nuisance material.
   INGESTION: No toxic effects, treat symptomatically and seek
   medical advice as necessary.
5. Fire-fighting Measures:
   No special precautions are necessary.
6. Accidental Release Measures:
   Clean spillage’s as appropriate.
   Use a vacuum cleaner for fine aggregate sizes.
7. Handling and Storage:
   Handling: Avoid creating unnecessary excess dust during handling.
   Storage: No special storage requirements – shelf life indefinite.
8. Exposure Controls/Personal Protection:
   Exposure Control Limits: 10mg/m3 total dust. 5mg/m3respirable dust. Use an appropriate dust mask in dusty operations. (avoid creating dust if possible)
   Protective Equipment: Wear appropriate eye protection during handling.
9. Physical and Chemical Properties:
   Melting Point: 2050oC
   S.G: 3.6 g/cm3
   Flashpoint: Not applicable
   Odor: None
   Boiling Point: >3000oC
   Solubility: Insoluble
   Color: Brown, dark blue/purple.
   Hazardous decomposition Products: None
   Hazardous reactions: None
10. Stability and Reaction:
    Material is stable and inert.
11. Toxicological Information:
    Classified as non-toxic
    TD Lo 90mg/kg (rat.intra-pleural)
12. Ecological Information:
    No specific effects.
13. Disposal Considerations:
    No special precautions are required – follow local requirements.
14. Transport Information:
    No specific requirements
15. Regulatory Information:
    Current dust exposure limits to be found in the latest edition of Health & Safety Executive Guidance Note EH40.
16. Other Information:
    Aluminium oxide (Brown Fused Alumina)
    contains no free silica and is classified as a nuisance material.

This information is taken from sources believed to be accurate. Zhengzhou Haixu Abrasives Co., Ltd, however, makes no warranty as to the accuracy of the information or suitability of the recommendations as to your operations and assumes no liability to any user thereof.